Destin Brass Products Co. Essay

The estimated costs calculated using the activity-based costing method is very different from the existing standard unit costs and the revised unit costs. Exhibit 3 uses the traditional cost allocation system, which allocates all costs based on measures of volume. In the standard unit costs, Destin Brass uses direct labor as the only cost driver, which rarely meets the cause-effect standard wanted in cost allocation. Exhibit 4 is similar to exhibit 3, but instead, 4 uses materials and machine hours as the cost driver instead of just direct labor. The new costs are calculated by using the ABC system, which allocates costs that are caused by non-volume-based cost drivers. After recognizing the overhead activities, costs of overhead resources used for the activities are allocated to the activities using cost drivers. Then pooled costs of each activity are allocated to products, using the cost drivers. It takes one large overhead cost pool and breaks it down into several pools, which for this company are: receiving and materials handling, machine usage and maintenance, packing and shipping, and engineering. These have a cause-effect relationship with activities and resources that are used. So unlike exhibit 3 and 4, the new system breaks down the overhead costs a lot more. The new estimated costs are more accurate because the amount allocated to each of the overhead activities for each product is more detailed. It shows the percentage of how much each activity is performed on each product. All 3 products’ unit costs in the new system are different from exhibit 3 and 4. Unit price for valves has a slight change compare to the standard unit price, but for pumps and flow controllers, there is a dramatic change. Destin Brass are well under their 35% gross margin goal for pumps, and wondering how other companies can sell their pumps for such a low price. They thought the unit costs for pumps is $63.12, when in fact, the more accurate system shows that it’s only $48.81, $14.31 less than the standard unit cost. This inaccuracy is the reason why Destin Brass is having trouble staying competitive with their price on pumps while other companies are able to sell it for a lower price. The flow controllers have never been a problem for Destin Brass. It seemed to them that they had no competition in that market. Even after raising the prices by 12.5%, demand did not decrease. This is because the more accurate unit cost for flow controllers is actually $100.48, and not $56.50, $43.98 more than what they thought. They have been selling their flow controller at $97.07 each, which is below the unit cost, and that is why no other companies are able to compete in that market. I think Destin Brass should definitely adjust their selling price for all 3 products. For valves, $58.16 should be their new target-selling price if they want to keep the 35% GM goal, but I think they should make the actual selling price to be a little lower than that. That way they can stay/be more competitive in the valves market while having a GM% that is slightly lower, but still close to the goal. Selling price for pumps will have to be lowered for them to become competitive in the pumps market, unlike before. $75.09 would be the price they want to sell it at if they want the 35% GM, but the selling could still be slightly lower then that, allowing them to be competitive while still very close to their goal. Flow controller prices will have to be higher if they want to make a profit from this product. Right now they are making a loss of 4% for each flow controller they sell. If they want to reach the 35% GM mark, they will have to up their cost from $97.07 to $154.58. Just like pumps and valves, price could be a little lower than that, and of course for the same reasons. Yes, this means they will go from having no competition to many competitions in the flow controller market now, but at least they won’t be making a loss every time they sell a flow controller. In the following month, assuming quantities produced and sold, activities, and costs were all at standard, the profit reported under the new system would be $540,260.00, and under the present system would be $539,180.00. There is only a difference of $1,080. Destin Brass will not see any major difference in profit in the short run; in this case it’s over a period of one month. But in the long run, they will definitely see major changes in their profits.

A Mother’s Legacy In Mary Shelley’s Mathilda Essay

Abstract Mary Wollstonecraft and her daughter Mary Wollstonecraft Shelley are two writers whose ideas are likely to be similar. Shelley admits that she is influenced by her mother. Therefore, the purpose of this essay is to find out and to identify the ideas presented in Wollstonecraft’s essay on women’s rights A Vindication for the Rights of Woman (1792) and see if they are incorporated into Shelley’s novella Mathilda (1819). My analysis of A Vindication for the Rights of Woman shows that Wollstonecraft’s main ideas are that limited education, the subjugation of women by the family, female dependency on men and romantic thinking are the source for women’s inferiority. This essay identifies and examines these ideas in the light of some secondary material and tries to suggest that they are visible as themes in Shelley’s Mathilda. In Mathilda, these ideas are visible as themes throughout the novel. The tragedy that befalls the characters illustrates the immoral and self-destructive tendencies which women obtain when being subject to these conditions. On the other hand, Shelley does not emphasize a lack of education and offers an additional point of view where Wollstonecraft’s views on motherhood are criticized. The conclusion drawn is that Wollstonecraft’s ideas must have had an influence on Shelley as the fate of the characters is an illustration of the society that is criticized in A Vindication for the Rights of Woman and its destruction. However, Shelley does not agree on ideas with the subject of upbringing and goes against a few of her mother’s main points, namely the role of mothers and the pre-eminence of education. They mostly have a consensus as most ideas that are present in one work are present in the other but Shelley has rebelled against some of her mother’s notions.

Jay Gatsby

Jay Gatsby Jay Gatsby, the main character in F. Scott Fitzgerald’s novel, The Great Gatsby, is a materialistic man, trying to live out the American Dream in the 1920’s. But, his way of life does not get him the woman of his dreams, and eventually leads to his death. He is an extremely wealthy man, but despite all of his money, is very lonely. Although he never gets the woman he wants, Gatsby was a dreamer. He was motivated to reinvent himself and buy his way through life, with a dream to recreate the past.Jay Gatsby was materialistic from the beginning. From his childhood, to his adult life, he dreamed of being rich. His parents were not wealthy and he grew up in the middle class, but he had always wanted lots of money. Nick Carraway states, â€Å"He was a son of God—a phrase which, if it means anything, it means just that—and he must be about His father’s business, the service of a vast, vulgar, and meretricious beauty† (Fitzgerald 104). No matter how he did it, Gatsby was going to be rich.From age seventeen he was determined and he would stick with his goal. According to critic Chikako D. Kumamoto, Gatsby’s â€Å"vast, vulgar, and meretricious† dream was shared by a social climbing. Nick finally figures out Gatsby’s plans with Daisy Buchannan and says, â€Å"He had waited five years and bought a mansion where he dispensed starlight to casual moths—so that he could come over some afternoon to a stranger’s garden† (Fitzgerald 80). Everything Gatsby did was to win back Daisy’s love.Being a materialist caused him to throw outrageous parties in hopes that one day, Daisy would show up to one. He believed that his money was the only way to win her over. Jay Gatsby was clearly a lonely man. He had all the money in the world to buy anything except for the woman of his dreams, Daisy. Throughout the whole novel, The Great Gatsby, he appears to be bored and alone. â€Å"Your place looks like the World’s fair† Nick Carraway says to Gatsby (Fitzgerald 86). Even to his death, no one cared enough about him to come to his funeral.Carraway tells us, â€Å"but neither a wire nor Mr. Wolfshiem arrived; no one arrived except more police and photographers and newspaper men† (Fitzgerald 110). Striving for only two things in his life never made him very popular. He threw extravagant parties, but no one knew who he was or even liked him for that matter. According to critic Brian Sutton, Gatsby goes to spectacular lengths to try to achieve what Nick Carraway calls â€Å"his incorruptible dream† (Fitzgerald 155). But, unfortunately Gatsby never gets the woman he longs for.Nick tells us, â€Å"After his embarrassment and his unreasoning joy he was consumed with wonder at her presence† (Fitzgerald 99). While Gatsby may have loved the real Daisy, the love that survived over time was of his dream-like conception of her. Jay Gatsby lived a life he dreamed of having but, he dreamed of getting Daisy back and never actually did. Nick tells Gatsby, â€Å"You can’t repeat the past† and Gatsby, being the stubborn man he is, says â€Å"Can’t repeat the past? Why of course you can! † (Fitzgerald 117). His dreams got in the way.Critic Brian Sutton states that Gatsby’s chances of winning Daisy were dead. Finding out the way Gatsby got his money ruined everything he could have had with Daisy. Throughout his whole life, Jay Gatsby would do anything to achieve â€Å"his incorruptible dream† (Fitzgerald 155). Daisy’s marriage seems so awful during most of the novel; it is almost like Gatsby is going to make his dreams come true. His efforts are so unimaginable and Daisy appears to be looking for a way out. Because Jay Gatsby is materialistic, lonely, and a dreamer, he is killed.His own attitude caused his death. Living out the American Dream, trying to become wealthy, and striving to win Daisy’s love did not pay off for Gatsby in the end. Works Cited Fitzgerald, F. Scott. The Great Gatsby. New York: Scribner, 2004. Print. Kumamoto, Chikako. â€Å"Fitzgerald’s The Great Gatsby. † Explicator 60 (Fall 2001): 37-41. Literature Resource Center. Web. 09 Nov. 2012. Sutton, Brian. â€Å"Fitzgerald’s The Great Gatsby. † Explicator 59 (Fall 2000): 37-9. Literature Resource Center. Web. 09 Nov. 2012.

Ugly Discrimination by A.S Article Example | Topics and Well Written Essays - 250 words

Ugly Discrimination by A.S - Article Example However, the article also mentions that since unattractiveness is one of the features that can be partially controlled by people themselves; they tend to spend lots of money trying to look attractive. In my opinion, the research findings are legitimate because employers do tend to keep factors such as race, gender and appearance in mind before deciding on a suitable employee for their organizations. Since these employers do not have any means of assessing the abilities of a potential candidate, they resort to past experiences of certain races or genders to infer future performance of candidates. Furthermore, cleanliness and good appearance leave positive impressions on employers, which in turn create a bias towards clean people. However, this does not imply that such discrimination is acceptable. Most successful companies claim to be equal opportunity employers, boasting a strictly ethical selection process and work environment. Discrimination in any form negates this claim and hence should be eliminated. Appearance, race or gender does not ensure an able and successful employee. Recruitment should only be carried out on merit based on qualifications and experience only. The article has successfully highlighted an important issue that is currently widespread. This issue has forced potential candidates, and current employees, to spend a great deal on ensuring that their looks and appearance are perfect.

Job Analysis (human Resource ) staffing class Assignment

Job Analysis (human Resource ) staffing class - Assignment Example Speaking with a fast food manager personally and asking to observe their daily routine and interactions with fellow employees would be a valuable way to figure out the job requirements and rewards for this particular job. Prior knowledge would vary from person to person and some will have a greater pool to pull from than others. Those that do not have a sufficient background in this area could seek out newspaper articles, documentaries, and books in order to fill in the blanks for the areas that they are less knowledgeable in. Section 3: The Sources Used Sources are another important aspect in conducting a job requirement or job rewards analysis. I used supervisors, job analysts, and Subject Matter Experts(SME) for the analysis of a fast food manager. The job analysts and SME’s are helpful as they are able to confirm the information that I have gathered thus far and correct any information that is not accurate. Similarly, speaking with fast food supervisors is a good way to fi nd out what is expected of potential employees that are seeking out a managerial position. Knowing these expectations provides invaluable background knowledge another layer to the analysis of job requirements or expectations.

Assignment1 economics Essay Example | Topics and Well Written Essays - 750 words

Assignment1 economics - Essay Example living for many in the Asian countries. However, the rapid growth in the economy of these countries have left the Middle East strained of skilled and unskilled labor. The Middle East's booming construction industry currently faces two main threats, the supply chain management of materials for construction, the supply of work force and the issues associated with them. Let us look at the questions below: 1. What has the government done to improve the situation The rise in the prices of oil affects the price of materials imported into the country for construction. The UAE government has cut down on import duty and is planning to launch its own materials supply company. More over the UAE is also launching its Nuclear energy program implementation organization according to the recommendations of the IAEA and the implemented organization will be called as the Emirates nuclear energy corporation. This is done mainly to meet the growing energy demand and facilitate construction companies. Company strategy& decision 4 Sources say that the UAE lifted cement and steel duties in March to reduce the burden on contractors and stabilize the steel market. The Dubai gold and commodities exchange launched its first steel rebar futures contract in October 2007 (Said Summer, Reuters 2008). The government has also paid attention to the rising dislike among laborers for gulf as a job destination the reason for the dislike being the low wages, poor working conditions, and lack of job security. Update "The UAE government has announced a review of workers' wages in the construction sector, following a series of strikes recently. The Cabinet has ordered a study on the salaries of construction workers." (Emirates Update... Said Summer (July 9, 2008) , 'UAE steel prices soar 15% in July' Construction and Industry news, Arabian Business.com , Retrieved on August 9, 2008 http://www.arabianbusiness.com/524340-uae-steel-prices-soar-15-in-julyln=en

The Shawshank Redemption 1994 Movie Review Example | Topics and Well Written Essays - 1500 words

The Shawshank Redemption 1994 - Movie Review Example We are held prisoners by our surroundings, and unless we are will to think outside the box, we will remain in the box. The movie tells of an incredible story about the desire for freedom. Although this movie may seem like any other prison movie at first, but as you continue watching it, you will discover that it is about hope, and it will captivate your heart. It tells the story of a certain prosperous banker who was sent to prison for killing his wife and her bed mate. He comes back home and finds them in bed, and out of anger, he shoots and kills them both. The judges pronounce him, â€Å"a particularly remorseless and icy man†. This banker named Andy Dufresne (Tim Robbins) is then taken to a prison called Shaw Shank, a prison reserved for the worst of mankind. In this prison, guards would often brutally beat the prisoners especially when they do something wrong, such as attempt an escape. Conflicts and fights among inmates was a common thing as well. Red is the narrator of this story and he begins it quite interestingly by saying, â€Å"I wish I could tell you that Andy fought the good fight, and the Sisters let him be. I wish I could tell you that - but prison is no fairy-tale world. He never said who did it, but we all knew. Things went on like that for a while - prison life consists of routine, and then more routine. Every so often, Andy would show up with fresh bruises. The Sisters kept at him - sometimes he was able to fight 'em off, sometimes not. And that's how it went for Andy - that was his routine. I do believe those first two years were the worst for him, and I also believe that if things had gone on that way, this place would have got the best of him.† As Andy enters the prison, he becomes the target of some of the prisoners, because he is new and looks weak. But this quickly changes as he starts to make some unusual friends. He meets a certain man by the name of Ellis Boyd â€Å"Red† Redding (a character played by Morgan Fre eman). This man who goes by the nickname Red has been sent to prison for life. He has covered a lot of years, and there is no hope for him of ever seeing the outside world. Andy soon discovers that Red likes to smuggle things in for the prisoners, and he exchanges them for whatever he wants. As the friendship between this two amazing men starts to build up, Red starts to realize that Andy is more than what meets the eye. But he doesn’t see much in him, as we can see in his comment, â€Å"I must admit, I didn’t think much of Andy first time I laid eyes on him, looked like a stiff breeze would blow him over. That was my first impression of the man.† In the meantime, Andy helps a certain hardened prisoner who has a tax problem, and in exchange he gets bottles of cold beer, and he distributes them to the other prisoners. This helps him get the soft side of most of the prisoners, and helps reduce some of the bullying from other prisoners. After this, Andy moves from one project to another. First he helps to make the prison library a better place, and he also helps the prisoners that tend to use the library by helping them to study. He continues to take care of the tax returns of the guards, and he continues further by helping the tough warden (Bob Gunton) in some areas he needs help. This proves to be a wise move because, as the years go by, he gets respect and trust from the inmates, guards and also

Female Homeless Speech or Presentation Example | Topics and Well Written Essays - 2500 words

Female Homeless - Speech or Presentation Example I have observed these issues in the culture of the people who live near Acadiana Outreach Center and this could has been one of the drives to establish this center within this place. I know that it is the wish of everyone here to live a dignified life with good places to settle and feel secure in the places in which we live. The places we live after we have divorced, have been bereaved or any form of unfortunate issue that befall us and leave us without a man we can depend on for a shelter and other basic need. Although these issues seem to have little impact on the lives of the people who are directly affected, there are effects that are extended to all the dependants of the women who lack the privilege of a place to stay, a place they can call home. This is because some of the homeless women are not without other roles but carry responsibilities of mothers and the providers for younger children and also are required to offer security to these dependants. These life demands push som e women into the streets or poor shelters where they seek cheap means of sustaining their lives as well as those of the children that depend on them. This is because most of the homeless women have no source of income and therefore, live on limited resources most of which come from begging and daily wages that they get from small businesses and daily labor. Today, we will focus on the ways through which homeless women can get some places to live and establish a sustainable way of living, which would be less dependent begging. This will mean that women will have their own plans to acquire dignified places of residence where they will not be vulnerable to the risky conditions of poor environment, which does not guarantee their security. We will also focus on the provision of the homes that is done by the government and how women can benefit from it with a focus of the requirement that a woman need to have so that be guaranteed it. This will not be a form of one side discussion but it will require all people to participate through asking questions and seeking clarification of an issue at any point in the course of this presentation. We that in mind, we can embark on the discussion on the various issues that have exposed women in the society to the risky homelessness and the contribution of the Acadiana Outreach Center in alleviating the condition. As many of you are aware, there are things that we face as women in the society since the cultural restrictions do not allow the women to own property. Because of this, many single mothers, divorced, unmarried, separated or widowed women who have little income have to undergo serious struggle to sustain themselves in good places in the world. Many of those who have little income do not have enough resources with which they can secure basic needs that they have for their lives. This situation has faced those women who have low education attainments because they do not secure opportunities in good paying labor market and therefore have to undergo a lot of struggle to get their needs (Burt, Pearson & Montgomery, 2007). In this discussion, I will use some materials that are contained in a small booklet that each of you will receive so that they can revisit the discussion later. These booklets will be available for everyone by the time we finish

Capital One Essay Example | Topics and Well Written Essays - 1500 words

Capital One - Essay Example On December 04, 2008, Capital One acquired a well known bank called Chevy Chase Bank. As per the deal, Capital One purchased the bank by paying $445 million in cash and 2.56 million shares of Capital One worth $75 million (Gaithersburg Local, 2008). Companies are directly affected by the external environmental forces that consist of political, economic, legal, social and technological elements. Changes in these external forces directly affect the company which necessitates it to modify the corporate strategies accordingly. In 2008-09, the world economy was shaken by a recessionary turmoil and the financial sector was the worst hit. Functioning exclusively in the banking business, the company is at a high leveraged state. When market conditions are favorable, their revenue as well as profitability increases quite rapidly but when the market conditions are hostile, the company faces a sharp fall in business. The economic condition has revived in the developing countries but the developed countries like UK and US will take more time to come out of this economic shock. Therefore economic condition is one of the vital forces that Capital One needs to consider. In terms of technology, Capital One enjoys a sound position. The political condition is quite stable in US hence this will not be a major concern. After the economic recession in US, the government is in the process of introducing certain changes in its legal framework to exercise a better control on the financial market. Hence, Capital One will need to understand the changes in the legal policies and should make the desired modification. Apart from the above mentioned forces the competitive force prevailing in the US market needs to be taken into consideration by Capital One. The retail banking industry is highly attractive which lures new entrants into this industry. The lenient strategy maintained by the government of US is an added advantage for the new entrants. The new entrants have not only

Forum Discussion - Coca-cola Company Essay Example | Topics and Well Written Essays - 250 words

Forum Discussion - Coca-cola Company - Essay Example riations.  So, before releasing any campaign in  the local  market, the national office of the company studies the future impact in country and modifies it per local culture before the release.   The company ensures that their marketing strategy includes local, national and regional traditions as well as customs. In Tunisia, the company sponsors the national football team, and engages the most popular singers to spread its message. As part of the CSR policy, the company sponsors students from this country for studying at Kelly School of Business at Indiana State University on  a regular  basis (Wagner).   Thanks for your response. As you know,  Coca-Cola is  a global corporation with appropriate company structure.   An essential part of company’s global business strategy, the sponsorship decisions are taken by integrated marketing department, located in headquarters of  Coca-Cola Company.   This department of the company is responsible for sponsorship, licensing and global media marketing strategies (Coca Cola). Since 1928, the company is sponsoring the Olympics, a global event handled solely by an integrated marketing department. Although, the company has been split in two parts -- Coco Cola Americas and Coca Cola International, the event will be promoted by both Coca Cola companies in their respective areas. Although  Coca-Cola is  a global company and uses  the global  approach for marketing its products,  the company policy regarding any ad campaign is to recognize the cultural and local variations and modify the campaign

Ethical issues on end of life care Term Paper Example | Topics and Well Written Essays - 750 words

Ethical issues on end of life care - Term Paper Example This paper discusses the ethical issues concerned with terminally ill patients. It is an important issue that must be discussed convincingly to make last days of the patients fulfilling. In the recent times, the ethical issues on end of life care have increasingly become much more important than being major concern for increasing Medicare bills or the inability of medicines to provide the palliative care that patients deserve in their last days of lives. The author has cited the case of Sara Monopoli, who was pregnant and at the last stages was diagnosed with metastatic cancer that is incurable. The exhaustive treatment that she underwent was testament to the deteriorating quality of her life. Apart from the huge Medicare expenses, the author rightly questions the efficacy of a system that deprives patients of the right to die in dignity and gives them hope when none exist. Author has referred Harvard Researcher, Nicholas Christakis who had interviewed doctors of nearly five hundred terminally ill patients as to how long they expected their patients to survive and then followed the progress of the patients. Sixty three percent over-estimated the time. It was revealed that though doctors were aware of the futility of medicines but they could not tell the same to the patients and made them undergo treatments which could, if at all, only slightly prolong their lives. They also knew that quality of lives of patients would be adversely impacted by the treatment but they went ahead just because the patients wanted them. Indeed, the doctors’ inability or deliberate intention to with-held the important issue that death is imminent and quality of life would be impacted is wrong. According to Act Utilitarian of Bentham, action which results in the happiness of one and all is a good act. ‘When choosing a course of action, one should always pick the one that will maximize happiness and minimize unhappiness for the greatest number of people’ (Bentham fro m Rosenstand p.176). While the doctors and surgeons knew that with incurable conditions, it was a long medical struggle with death being imminent, they did not try to discuss as to how one would wish to live last days. Interestingly Kant’s moral philosophy is a case in point as he asserts that people rationalize their actions according to what they deem as morally good (Schneewind, 1990). Hence, under the circumstances, it seems that doctors under medical oath, deemed it morally right to talk about death when it could be prolonged. The article has carried lot of research and shows that as against ordinary medicine’s goal of extending life, hospice and other palliative care hugely help terminally ill patients to have quality life that is cherished by family and facilitates peaceful death. Most importantly, the family and carers have less cases of depression after the death of the dear ones when they die in the hospital’s intensive care unit, burdened with technol ogy driven aids and devices. The Hospice makes effort to reduce pain at the last stages but just try to ensure that they have ‘fullest possible lives’ with their family and friends. As author asserts that death only comes once, hence, dignity in death must be observed or discussed with family and

Amusement Park Place Essay Example for Free

Amusement Park Place Essay Amusement Parks are on of Americans favorite places to go. You get to ride roller-coasters, play games and just have fun. The thrill you get by getting is one of the best feelings you will ever have. When you first walk in the amusement park you feel your adrenaline rush by seeing all the people go crazy over the roller-coasters and the games. Adventure parks are an adventure that everyone needs to experience once in their life. Roller-coasters are a thrill that everyone should experience at an amusement park. Rollercoasters are what make amusement parks so fun. There are many different types of roller-coaster that has many different types of loops such as a corkscrew, the regular flip, and many more. Some of the biggest roller-coasters that I have ever been on are the ones at Six Flags. I rode the Batman, Superman, Georgia Scorcer, Deja-Vu, and all the other roller-coasters they had. My favorite was Superman; you are flying through the air just like Superman. The loops were like corkscrews and had some straight drops. Everyone needs to experience a roller-coaster ride at least once. There are many amusement parks all around the United States that you can go to and have fun. One is in Atlanta, Georgia home of Six Flags. Another one is located in Cedar Point, Ohio which is called Cedar Point and is one of the most popular visited amusement parks. Another one is Bush Gardens located in Tampa, Florida. I got to visit Bush Gardens this past Spring Break it was the best amusement park I have ever been to. There were a lot of family activities such as games, food, and roller-coasters. They didn’t have many roller-coasters, but the ones that they did have were my favorite. There are a lot of many different amusement parks around the country that you can take your family and have a great time. Games at amusement parks are also what make amusement parks so much fun. If you are scared to ride the rides just go ahead and play games. There are many games you can play like basketball shoot, racing games, shooting games and many more. If you end up doing good in the games then you will get prizes such as stuffed animals, candy and a lot more stuff. Games at amusement parks are parks are fun to play and make the amusement park experience unforgettable. Amusement Parks are fun for families and friends to go and bond for the day. Amusement Parks are enjoyed when you go and the ride the roller-coasters, play games, eat food, and go to Some of the shows that the parks have to offer. Amusement parks have been around forever and and that is why so many Americans love them so much. They allow you to have fun and relax for the day. Amusement Parks are a lot of fun and I think everyone should go to at least once to see for themselves.

History Of Suspension System Engineering Essay

History Of Suspension System Engineering Essay For my assignment, I will be talking about suspension. I will explain everything from the early development of the suspension system, the research and development, the differences of each suspension towards application, and so on. The main why the assignment has been done is because it teach us and tells us all sorts of things that is all about suspension and why is has build in such a way that the suspension should perform depending on the type of cars. History of Suspension System The first suspension to be introduced is from horse-drawn carriages in the 19th century. It uses a multiple layer of steels, or in some cases, use wood as a spring. It is known as a leaf spring. As modern cars were design to move at a faster speed, new type of suspension are needed. In the early 1900s, shock absorber were being introduced in cars by a guy name The Function and the Purpose of a Suspension System The main role of a suspension system is to maintain a maximum contact between the tyres and the road surface, to provide steering stability and also to provide good handling during low-speed and high-speed corners. The suspension helps to generate as much traction as possible, depending on the driver and how the driver handle the cars suspension system and helps to minimize the body roll resistance. It helps to isolate the body from the vibrations of the shock absorbers. Roads that currently exist are not flat and straight. If the roads are all flat and straight, theres no point installing a suspension system for cars. When roads are not flat, theres a force reacting on the shock absorber and the springs through the wheel. According to Newtons law of motion, all forces have both magnitude and direction. The other main importance of a suspension system is that help to provide a correct alignment during steering, to reduce the amount of body roll, to allow the driver to turn corner agg ressively without extreme body roll and to prevent body dive, that is to reduce the body to tilt up and down during acceleration and braking. Two main components are responsible to all these kind of job that is shock absorber and spring. Spring The function of the spring is to support the weight of the vehicle, and to absorb road shocks being transferred from the wheels. The spring bounces up and down when passing through holes, bumps, and uneven road surfaces. There are all sorts of springs: Coil- It is made out of a special steel rod, which is made by winding a wire around a cylinder. It is most commonly used in light vehicles. The wire will twist when the coil is being compressed or stretched. The design of a coil spring can be a cylindrical, barrel or conical shaped, depending on what kind of spring that are required for the type of the car. The material used for springs have to be capable of withstanding high stress and resisting fatigue. In early design, designers use high-carbon steel, but today, designers use a very minimum amount of alloy steel such as silico-manganese are used. Leaf Spring- It has several flexible tempered plates with different length, which is stacked and being held by a steel clip. It is mainly used on rear-wheel drive vehicles, such as 4 wheel drive. The function is the same as the coil, but the only difference is that the leaf has minimum amount of flexibility than the coil. The stiffness or rate of a leaf spring is governed by: Length of the spring- à ¢Ã¢â‚¬  Ã¢â‚¬Å" the length of the spring, à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the rate of the suspension Width of the leaf- à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the width of the spring, à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the rate of the suspension Thickness of the leaf- à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the thickness of the leaf, à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the rate of the suspension Number of leaves- à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the amount of leaves, à ¢Ã¢â‚¬  Ã¢â‚¬Ëœ the rate of the suspension Torsion Bar- A torsion bar is a long straight alloy-steel bar, fixed between the chassis to the suspension control arm. The torsion bar will twist at the centre of the bar when the spring moves upward and downward. The spring rate varies the length and the diameter of the bar. When the driver turns the wheel, the torsion bar will twist, and reduces the roll tendency. Air Spring- It is a rubber cylinder, filled with compressed air. This kind of spring is being used in heavy commercial vehicles and luxury cars. It provides comfort compared to the coil spring. The volume of air is being varied, depending on the load of the vehicle being added, to lower the vehicle, and go adjust the stiffness of the air spring. Rubber Spring- It is used as the main suspension spring, or fitted with a metal springs to improve / upgrade the suspension characteristics. Shock Absorber The function of a shock absorber is to help dampen the amount of bounce created by the spring. The absorber gives the spring the freedom of bounce, but shock absorber is there to help dampen the undesired amount of bounce and thus, create stability of the vehicle. Here are the few types of shock absorber being used currently on the roads: Hydraulic Shock Absorber- Most of the vehicles are using this kind of shock absorber. It is called a direct-acting telescopic type. Its damping action is being produced by the oil transfer, which is under pressure, and goes through the small valve which helps to restrict the oil flowing in and out. The most widely used is the twin-tube type. During compression, the piston moves towards the shock absorber. And during rebound, its a complete opposite. Gas-Pressurized Shock Absorber- In the hydraulic shock absorber, the oil heats up as the suspension is in motion. This shock absorber helps to reduce the dissolve pressure by using fluid with nitrogen. This improves the dampening effect, thus improves the absorbers performance. Load-Adjustable Shock Absorber- This type of absorber helps to pressurize the shock absorber when the springs are under load. By adjusting the pressure, it helps to maintain the car height and adjusting the suspension stiffness. This helps to reduce the discomfort of the driver and the passenger. In order to reduce the discomfort of the driver and the passenger, the driver can adjust the air spring manually. The construction is almost as similar as the air spring, where you can adjust the ride height and the stiffness of the absorber. Manual Adjustable-Rate Shock Absorber- The adjustable-rate absorber has a feature where you can change the spring oscillations by changing the rate of dampening. It has a damper rate adjustment located on the external of the shock absorber. You can control the restriction of the oil passing through by changing the valves in the piston. Electronic Adjustable-Rate Shock Absorber- It acts the same as the manual adjustable-rate shock absorber. The only different between the manual and the electronic is that the rate of the shock absorber can be controlled electronically or by drivers choice. This is a solenoid operated with the help of the ECU, which allows different types of modes to choose. Automatic Load-Adjustable Shock Absorber- Also called as self-leveling shock absorber. When theres load on the vehicle, the shock absorber will self maintain at a pre-set level. It automatically adjusts the height of the vehicle, depending on the load added at the rear axle. It consists of air-adjustable shock absorbers fitted at the rear, an air-dryer assembly, ECU, and an electrically-driven compressor. Types of Suspension System There are all sorts of suspension system being used today, and they are: Non-independent Suspension Solid / Live and Dead / Beam axle suspension system A Live axle is an old technology. It is a combination of a solid axle being put across the cars chassis, which is being connected at both front and the back of the wheels. This suspension is not independent, so when 1 wheel goes through a hump, the shock produced on that wheel will be transferred to the other wheel. This Live / Solid axle suspension consists of a drive shaft, a differential, and a strong tube enclosing all these things. The unsprung weight for this kind of suspension is very high because the whole axle assembly is fixed rigidly to the wheels. The result of an unsprung weight is that the more weight it gains, the momentum is higher. So in this case, a lot of momentum the springs have to handle because springs cannot absorb momentum, so therefore part of the momentum has to be transferred to the car body in a shock form. Because of this, this kind of axle does not provide a good ride quality. In the Dead / Beam axle, theres not driving axle on it, so therefore it has a very minimum amount of unsprung weight and it produces better ride quality than a live axle. Advantage Disadvantage Cheap Its not independent Body roll does not interfere with the camber of the wheels Theres no ride quality Simple construction The size is not practical When one wheel has a force on it, the force is being transferred to the other wheel DeDion axle suspension system In the late 70s, non-independent suspension market is stronger than the independent suspension, although the independent suspension were invented many years ago. The main reason why is because non-independent suspension is cheaper and offers better handling than the independent suspension. In this suspension, it helps to eliminate all the unsprung weight rather than the live axle suspension. It has minimum amount of unsprung weight is because the differential / final drive and the drive shafts are not rigidly attached to the rear wheels and therefore they are part of the car body and its flexibility to the wheels with the help of the universal joints. By using the DeDion technology, it helps to improve the ride quality by limit the wheel track variation when the suspension is at motion. In order to do this, the DeDion technology uses a sliding joint. The best part of using this is that it is always perpendicular to the road surface by keeping both wheels on the road surface, excludin g the body roll. Advantage Disadvantage Cheaper than most independent suspension Its not a independent suspension The camber are not being affected even with body roll The ride quality is not as good as the independent suspension The ride quality is more superior than the live axle suspension When the car is on a bump, both of the rear wheels will be cambered Semi-Independent Suspension Twist-beam rear suspension It is based on a large H shaped member. The front of the H shaped member is being attached to the chassis with the help of rubber bushings and the rear of the H shaped member is attached to the wheels. The H manage to get the support by using the cross beam. The cross beam serves as to provide roll stiffness during corner and bump. It has a twisting action when both trailing arms move vertically. Coil springs and shock absorbers are being used in this system, located either behind, or alongside with the wheels. It provides high motion ratio and the end result, giving better performance and the weight reduction. The location of the cross beam is longitudinal as the roll steer control and its camber compliance. Independent Suspension Swing axle suspension system Its an old suspension, first introduced by some sports cars in 1950s. This kind of technology has been phased out in 2 decades due to its weaknesses. The adjustment of the camber angles can be detuned by changing to a longer swinging arm. Usually, this kind of technology serves a lot of under steer, so by setting the wheels to a negative camber, it helps to reduce the unnecessary amount of under steer. Advantage Disadvantage Provides an Independent shock absorption Provides a very bad handling during corner So much body roll Tends to oversteer a lot Trailing / Leading arm suspension system A large piece of suspension that helps to support the coil springs, which are being located in front of the rear axle and connected to the axle of the cars chassis. The main role of this kind of suspension is to allow the wheels to move up and down and this does not allow the camber to change. The only time the camber changes during corners. The advantage and the disadvantage are the same as the semi-trailing arm suspension. Semi-trailing arm suspension system In this design of suspension, compare to the trailing / leading arm suspension, its pivoted in an incline angles, roughly in between 50 to 70 degrees. The feature of the suspension is the same with the trailing / leading arm suspension. In both semi-trailing and the trailing / leading arm suspension are rigidly attached to the wheels. So when taking corner or taking bump aggressively shocks and noises will be transferred to the cars chassis. But now days, automotive industry are moving to multi-link or double wishbone suspension. So therefore, the trailing / leading and semi-trailing arm suspension is going to be phased out. Advantage Disadvantage Its an all rounder, not much weakness Detuned version of multi-link suspension Understeer, but not much When the wheels are moving up and down, the camber angle changes Shocks and noise are being transferred to the cars chassis Adaptive air suspension system It uses air suspension rather than using the conventional shock absorber and coil spring. You can electronically changes the damping rates to suit the driving conditions. The air suspension inflates and deflates; depending on the driver weather the driver choose the height of the car. Advantage Disadvantage Provide precise handling Expensive parts Capable of handling heavy load Adjustable height and spring rate Torsion beam suspension system Majority of the small car segment uses this kind of suspension. Its half-independent, which consist of a torsion bar, which is being used to limit the degree of freedom when force is being produced when taking in a corner. Its more superior to its competitor, like the MacPherson strut suspension. Advantage Disadvantage Provides more leg room for the rear seat of the car and more space for the boot Doesnt provide the same ride and height quality as the double wishbone or the multi-link suspension Cheap Limited amount of freedom Easy to maintain Inferior in ride and handling quality Double wishbone suspension system In this era, many sports car such as Lotus, Ferrari, and all the famous top marquee car brands, are using this kind of suspension system because it can be used at both front and rear wheels, and to top it all off, it has almost near perfect camber control. Its has long been used in racing, sport and top of the range cars for more than 40 years as it provides better and precise control. Its main role is to maintain the wheel perpendicular with the road surface, no matter how aggressive the driver handle the car. In the early days of double wishbone, it consists of 2 parallel wishbone arms in equal length. The main problem with this is that the tyres are producing excessive scrubbing due to the variable track width when the wheels are shifted off from the neutral position. So engineers have given a best solution, which is to develop unequal length and non-parallel A-arms to solve the problem. By doing this, the engineers tilted up the upper arm. The shock absorbers and the coil springs are installed onto the wishbones because it helps the engineer to adjust camber and caster angle, toe, roll centre height and scrub radius. The reason why 1 wishbone is shorter than the other is because to make the camber negative. The shorter wishbone is installed on the upper mount. When it sets to a negative camber, the result is a positive camber gain on the outer wheel when the vehicle is turning. Not only that, the outside wheel gains back negative camber due to shorter upper arm. Advantage Disadvantage Proper camber control Not space saving Provides good handling Expensive Low unsprung weight A lot of components and needs more pick up points in the cars chassis Strong MacPherson strut Chapman strut suspension system Invented by a guy the name of Earl S. MacPherson in the 1940s. Ford started to use this kind of technology in the 1950 because of its low cost and space saving and thus, MacPherson is one of the dominating suspension system. In the design, the telescopic shock absorber purpose is control the wheel position, and because of this, it doesnt require an upper arm. It is very compact because the strut is build vertically. Many front wheel drive and compact cars inherit this kind of suspension system because of the space being occupied by the engine and the transmission. This design is not suitable in sports and performance car as its height requires a higher hood and fender line. And because of this, it doesnt provide a good handling and it has a little camber change, unlike the double wishbone suspension. MacPherson can be used in both front and rear wheels. Another kind of strut is the Chapman strut being introduced by a guy name Colin Bruce Chapman, founder of Lotus. Its another kind of Independent Rear Suspension (IRS) that is using a lateral link with a long spring strut. The features are the same as the MacPherson and its used for the rear of the wheels. Only some model such as Lotus and the Datsun are using this suspension but it has already being phased out. Advantage Disadvantage Small and compact Provides an average handling Cheap and easy to maintain Camber change due to body roll Simple design Excessive height Multi-link suspension system This kind of suspension system is being introduced in the late 1980s. More modern cars are using this kind of suspension system as it is independent suspension system, uses a minimum amount of short links being attached to the hub carrier and to the body, and it developed a consistent handling and traction. Its mainly used in rear wheels, not the front wheels. It helps to allow the individual wheel in the rear of the cart to move freely during bumps and uneven roads without affecting the opposite wheel. But during the Research Development of the cars, most manufacture favors MacPherson struts, swing axle and trailing arm because of its disadvantage of the suspension system. The multi-link suspension uses a few amounts of short links, being attached to the cars chassis. The link are being used to eliminate the changes of the camber angle during movement, and to control the Toe and Caster depending on the geometry design of the link. Some manufacturers use 3, or possibly up to 5 links to provide better performance. This kind of suspension is expensive, but an Italian company named Magneti Marelli, are developing a cost-effective multi-link suspension for small cars. In their new design, it uses a flexible links to reduce the cost and use a simple bushing to reduce noise being transmitted to the cockpit. Advantage Disadvantage Provides good handling More expensive than the MacPherson and torsion beam Provides good ride comfort Not compact Poor camber control Heavy Too complex Leaf suspension system Leaf suspension is the oldest suspension in the automotive industry. And today, there are still cars that are using leaf spring, mainly for 44, trucks, and other heavy vehicles. The leaf suspension makes its way in production in the 70s. Even some race cars are using leaf suspension system but only in dirt and asphalt. There are 4 kinds of leaf being introduced, and they are: The monoleaf: The spring is thin and provides a low rate shocks. But in this design, it requires an additional support of springs because monoleaf is not sufficient enough to support the additional load. Multileaf: Its made up to multiple layers of leaves with different length. Many 44 are using this kind of suspension as it provides higher spring rate and manage to support and control the axle. Advantage Disadvantage Capable of supporting the weight of the chassis The steel tends to lose its shape Able to control the chassis roll more efficient The handling will be affected when the sag is uneven Manage to control the rear end wrap-up and axle damping Not much adjustment Capable of controlling the lateral forces produced by the car, the same feature as the panhard bar Hard to install Manage to withstand braking forces Not much dampening so therefore, the ride will become stiff During acceleration and braking, it manage to regulate the wheelbase length Cheap Simple design Sliding pillar suspension system This kind of suspension features are almost the same as the independent rear suspension. And to be precise, it works as well as the current suspension system such as the wishbone suspension system and trailing link suspension system. But this technology is long gone in the 1950s and being replaced by wishbone. Sub-frame mounting suspension system In modern cars, reducing noise, vibration and harshness are important to the users. And in conventional suspension system, suspension systems are mounted to the chassis. In this suspension, it uses a sub-frame mounting to overcome the noise, vibration and harshness from the conventional suspension system. Its made out of aluminium to reduce the excessive weight. Rubber Suspension System The reason why rubber suspension is being introduced is because it can store more energy per mass than any conventional type of suspension. The rubber springs works during compression, meaning to say that it replaces coil spring. Twin traction beam suspension system Commonly known as a TTB. It is an independent suspension used by 44. It was first recognize by Ford in the 1950s. This kind of suspension has an axle thats able to break into two suspension members. This suspension is being used to minimize the camber and track change. When one of the wheels camber changes, the other follows but in an opposite direction. Advantage Disadvantage The suspension travel distance Camber becomes negative a lot when in corners Stability Reducing body roll Design Shock Absorber In the automotive world, there are 2 kind of basic shock absorber design that is still in use today. They are: Twin Tube design Gas Charged Twin Tube Position Sensitive Dampening (PSD) Twin Tube Acceleration Sensitive Damping (ASD) Twin Tube Mono-Tube design Air shock absorber Damper shock absorber Twin Tube Damper Low Pressure Gas Filled Twin Tube Damper High Pressure Gas Filled Mono Tube Damper Linear Damper Before I explain further the difference between these two shock absorbers, I would like to explain the basics of the shock absorber. Many people dont really know, or even care about the importance of the shock absorber. The main role of a shock absorber, in general, is to reduce as much movement of the suspension and the spring control as minimum as possible. To accomplish this, the hydraulic fluid helps to remove all these energy through thermal, or heat energy. The construction of a shock absorber is practically like an oil pumps. The piston is used to push the hydraulic fluid into the pressure tube with the assist of a piston rod. The hydraulic fluid is being forced to go through tiny orifices into the piston as the suspension is at motion, which is up and down. The resistance of a shock absorber varies, depending on how fast and the size of the orifices being pushed through the piston. Modern shock absorber can reduce the amount of bounce, roll, brake dive and acceleration squat because of the velocity sensitive hydraulic dampening being installed into the shock absorber. In other words, the faster the suspension movement, the higher the resistance of the shock absorber being provided. When the shock absorber is in motion, its moving up and down. When it moves up and down, it means the shock absorber is doing a compression cycle and extension cycle. Lets take a closer look at the compression and extension cycle. Compression Cycle In order for the fluid to move from chamber A to chamber B, it has to go through 3 valve stages in the compression valve. When the piston is in a slow motion, the piston pushes the fluid flows through the oil port but with a restricted amount of fluid being flown to the oil port in order for both chambers to be controlled. But when the piston are moving in a fast motion, the opening of the disc from the valve seat are open widely in the camber B and causes the increase of fluid pressure below the piston. Theres restriction in the third stage orifice when the vehicle are at high speed. Extension Cycle The extension cycle happens where the piston and the rod are being pushed upwards. When the piston are moving upwards, the pressure in the chamber A will be higher than the pressure in the chamber B and thus the fluid are being flown into chamber B by going through 3-stage extension valve. The fluid volume in chamber A is insufficient t fill into the chamber B because the piston rod are being withdrawn from chamber B and this causes the pressure in the reserve tube are greater than the pressure in chamber B, causing the compression valve to be unseated. Twin Tube Design Lets take a look at the Twin Tube design. This kind of shock absorber has 2 tubes, one is known as the working pressure or pressure tube, and the other tube is known as the reserve tube. As you can see the picture on the left, the outer tube is used to store excessive fluid when the shock absorber is moving upwards and downwards. When the pressure tube is short of fluid, the reserve tube sends fluid to the pressure tube. During compression, the fluid in the pressure tube sends fluid to the reserve tube. The upper mount of the shock absorber are usually being connected to the vehicles chassis. There are all sorts of rubber being used in between the shock absorber and the chassis in order to reduce road noise and vibration being transmitted to the cockpit. The rubber bushings are flexible, so therefore the suspension can move freely. In the picture, you can see that the upper mount is also known as the piston rod, and the bottom of it is a piston. The piston rod needs to be guided when its at motion, so the engineers use a rod guide; some call it bushing, to keep the piston and the piston rod straight. The seal are being used to keep the fluid and the pressure inside the shock absorber. At the base of the shock absorber, theres a base valve, normally known as a compression valve. This item helps to control the fluid movement when the shock absorber is at motion. The design / bore size of the piston varies, depending on what application. Most 44 are using bigger bore size than the sedan cars. And because of the large piston diameter, the unit will become larger and the potential control will be higher. With bigger diameter, the operating temperature and the pressure is low due to area of the shock absorber and the piston bore and thus, this provides higher damping capabilities than the smaller bore. There are a few types of twin tube shock absorber: Gas Charged Twin Tube shock absorber Position Sensitive Damping (PSD) Twin Tube shock absorber Acceleration Sensitive Damping (ASD) Twin Tube shocker Gas Charged Twin Tube Shock Absorber This kind of suspension system uses low pressured nitrogen gas in the reserve tube but the amount of nitrogen gas varies, depending on the amount of fluid inside the reserve tube. The purpose of the gas is to minimize the hydraulic fluid aeration to prevent the foam build up because foam can be compressed. The gas charged shock absorber provides engineers more flexibility to design the valve. The other main advantage is that in the vehicle, it creates a mild boost of spring rate. Among the other benefits of this shock absorber is: The reduction of roll , sway and dive, the handling is improved Providing better smooth control in any road conditions and corners Longer heat transfer in gas charged shock absorber Position Sensitive Damping (PSD) Twin Tube Shock Absorber The Position Sensitive Charged is still new in the automotive world. In this design, the ride control and comfort are optimized, thanks to the tapered grooves located at the pressure tube. This absorber provides a smooth and a comfortable by reducing the resistance onto the piston, by allowing the fluid to pass freely and smooth around the piston. Here are the advantages of this shock absorber: Providing a smooth ride Can easily adapt to variable road and weight conditions. Acceleration Sensitive Damping (ASD) Twin Tube Shocker The features of this absorber is the same as the other twin tube shock absorber, the only addition is that the compression valve is design to sense a bump on the road and automatically adjust the shock to provide better control of the shock absorbed. Mono-Tube Design In the mono-tube design, theres only one tube in the high-pressure gas shocks, known as the pressure tube. There are two working piston inside the mono-tube design, that is a working piston and a dividing piston. The mono-tube and the twin tube design are almost similar but the only difference is that the mono-tube can be install in any way, either mounted upside down or right side up, but either way, it still works the same. The unique design of the shocks is that it doesnt use a base valve, but it uses a piston to control the extensions and compressions. In the mono-tube design, it has a larger pressure tube to comply with the dead length, compared with the twin tube design. The downside of this design is that its going to be difficult for the engineers to install this kind of shocks into the cars instead with the twin tube design. The separation of the gas and the oil is done, with the help of the free-floating dividing piston. The gas below the dividing piston is pressurized, at around 360 psi to accommodate the vehicles weight. When the shocks are at motion, the movement of the dividing piston varies, depending on the movement of the piston rod in order for the pressure in the tube are pressurized at all times. Heres the upside of the design: Can be mounted freely, compare to the twin tube design, and helping to reduce the unnecessary unsprung weight The working tube can work harder because the working tube is exposed, so therefore can be cooled easily. Every upside of the design, theres always a downside: Easily destroyed when theres a dent Hard to install onto the passengers car that has a twin tube design Damper Shock Absorber Damper shock absorber, or as short, damper, are used to provide an optimum absorption of shocks and smooth lateral deceleration. The dampers can be powered by fluid, or mechanically powered.

Methodology And Benefits Of Ecotel Hotels Tourism Essay

Methodology And Benefits Of Ecotel Hotels Tourism Essay ECOTEL ®? ECOTEL ® is an environmental certification that enables hotels to be truly green, socially responsible, and sustainable over the long term by involving the entire value chain of owners, architects, operators, employees, suppliers and hotel guests. What is the ECOTEL ® Methodology? The ECOTEL ® methodology evaluates a hotels systems, processes and practices for environment friendliness through a stringent assessment of its range, scope and results across five crucial parameters, known as The Five Globes. These are: Environment Commitment, Solid Waste Management, Energy Management, Water Management, and Employee Education and Community Involvement. To be certified as an ECOTEL, a hotel must score the minimum qualifying percentage on each of the globes. What are the benefits for ECOTEL ® Hotels? †¢ Lower operating costs, greater profits through a focused effort on reducing waste generation and increasing operational efficiencies. †¢ Enhanced visibility for members through the ECOTEL ® website who also gain access to the reservation engine and other marketing features. †¢ Publicly recognized branding for hotels that may have/not have partnered with international chains. †¢ Value for money, as the cost of certification is comparatively lower than others to enable hotels to truly benefit from the transfer of knowledge. HISTORY of ECOTEL ECOTEL ® was developed by HVS in association with the Rocky Mountain Institute, USA with the help of engineering and hospitality experts. Conceptualized in 1994 by HVS the worlds leading consulting and services organization focused on the hotel, restaurant, shared ownership, gaming, and leisure industries ECOTEL was a pioneering program specific to hospitalityWhy should you choose to be an ECOTEL ®? Rigorous standards used for the certification methodology that are regularly updated to keep current with scientific advances and international thinking. Specific to hospitality as ECOTEL ® is managed by HVS, a global consulting giant in hospitality. Recognition of hotelà ¢Ã¢â€š ¬Ã‚ specific green operations with hotels demonstrating substantial such evidence encouraged to seek certification, instead of just those who could build in the features. Broader in scope than other certifications as it enables a hotel to function responsibly while positively impacting the local community. Handholding throughout certification period, as clients are updated and assisted to improve their performance through consultation, training and identification of operational areas where they can improve efficiencies and cut back consumption. Spans the positioning spectrum, recognizing high levels of environment commitment and environmentà ¢Ã¢â€š ¬Ã‚ friendly operations in hotels irrespective of size, positioning, or profile. How to be an ECOTEL ®? Hotels seeking the ECOTEL ® Certification are assessed for their environmental readiness through a property walkthrough, which entails inspection of different departments and random interviews with hotel staff. As per their status, they are either awarded the specific certification or enabled through a customized blueprint to achieve a specific level. In case of the later, the hotel is finally audited after the intervention and awarded the certification The Five Globes The methodology for the ECOTEL Certification is centered upon the idea of the Five Globes or five areas of certification, which together encompass the processes, systems and practices that ensure an environmentally responsible hotel operation. An audit is undertaken in each of these globes based on an audit checklist. The audit checklist for each of the globes is very well researched and based on scientific and technological advances and international charters and treaties specific to saving the environment. Environment Commitment A hotel demonstrates its environmental commitment through wide ranging programs and best practices that minimise its impact on the environment throughout its value chain while lowering overall business costs. Solid Waste Management For the hospitality industry, the waste created by daily operations is an ongoing challenge. In addition to incurring the costs of waste disposal, hotels need to also allocate valuable back-of-the house space for waste to be stored and sorted. For hotels, a good waste management strategy results in greater operational efficiencies, keeping waste out of the landfill, and reducing greenhouse gas emissions. Energy Management Energy is among the fastest-growing cost items for the lodging industry worldwide. In India, it approximates 8-15% of a hotels gross revenue. While design and operating system-improvements provide the framework for conservation of resources, large energy savings and thereby economic efficiency results through the switch to low-cost, easy-to-implement alternatives and a regular maintenance schedule. Water Management The rampant overusing and wasting of water along with global warming has led to a water-scarcity challenge that has serious implications for the global community and economy. A good water management strategy includes conservation of water through Efficient technology and programs, recycling through measures like grey water treatment, as well as earth-friendly practices like ground water recharge and rainwater harvesting. Employee Education and Community Involvement Motivating employees to understand the need for a change to environment-friendly practices, believing in them, and adapting them is a necessity for environmental initiatives to be both successful and sustainable. A well-thought out and well-executed education and training effort enables this. ECOTEL hotels also raise eco-consciousness in the community through either awareness campaigns or practices that can be built into the community, thus truly facilitating a change for a better environment. The graphic on the right shows the ECOTEL logo represented by the Earth in the centre, surrounded by the five globes or areas of ECOTEL Certification. Together, these five globes encompass the processes, systems, and practices of environmentally responsible hotel operations. Thus, the image conveys that ECOTEL through its five globes is a Certification that cares for the WORLD. Certification Details The certification is valid for a period of one year only, after which members must reapply. It is applicable to hotels irrespective of a member hotels country of origin since it is designed specifically for recognizing environmentà ¢Ã¢â€š ¬Ã‚ friendly systems, operations, and practices in hospitality. The Process The Process for Certification is typically undertaken in three steps, which are: D:Z-ArenaSIMSR AssignmentsPOMECOTELFlowChart.gif Step One: Property Assessment: In an effort to understand the current standards observed by the hotel, an in-depth assessment of the property is conducted covering all the relevant areas of focus. The inspection includes: Interviews with the management and staff to comprehend the propertys commitment to environment. Physical inspection of the subject property including back-of-the-house areas to evaluate the systems employed for undertaking environment friendly operations. Collating data on consumption of various resources such as electricity, water, diesel, and chemicals among others to assess the processes for environment friendly operations. Interviews with the staff to assess their knowledge, attitude, and training levels to carry out environment friendly operations. This stage of the certification process culminates in generation of a Property Assessment Report that details the propertys baseline status as regards achieving minimum standards considered essential for an ECOTEL. Step Two: Roadmap for Certification:- If the hotel wishes to certify itself as an ECOTEL, our team prepares a detailed blueprint for the certification in conjunction with the hotels management team. This Roadmap for Certification includes mutually decided targets, technology, and training workshops that will enable the hotel to become an ECOTEL. The process is estimated to take upto 5-6 months and will include training initiatives, inclusion of best practices as part of the hotels standard operating procedures and the necessary capital infusion where required. Phase Three: Audit: A final audit of the property shall then be conducted and a certification awarded on its successful completion. Rating System: The hotel is rated on the parameters defined in our checklists covering the five globes. Our methodology rates every standard on a Likert scale, assigning weights to them based on their contribution. The checklists have a predefined minimum standard, Primary Criteria, which every participating hotel has to clear before being certified as an ECOTEL.

Perception of McDonald’s Essay -- Business, Unhealthy Food

Perception of McDonald’s McDonald’s has expanded globally into 31,000 worldwide outlets and employed more than 1.5 million people in more than 119 countries (Kulkarni, Lassar, Sridhar & Venkitachalam, 2009). Nevertheless, McDonald’s always faces negative perception and commonly related in serving unhealthy and junk foods amongst its customers around the world (Currie, Dellavigna, Moretti, & Pathania, 2009). It is not only the negative perception of public, but McDonald’s have been attacked and accused of selling unhealthy food in several countries, including the US, China, Belgium, Holland, India, Russia, Sweden and the United Kingdom (Wilson, 2009). Meanwhile, the core of the current problem is that customers’ still buy fast foods, even though they have negative perceptions on McDonald’s as regards to unhealthy foods. At this point, customers are confused about fast food nutrition messages provided by McDonald’s, while it is still perceived as bad images (Deng, 2 009). In order to overcome this issue, there are changes in McDonald’s marketing and communication strategies as they have started to plan strategic action with two objectives; first, to change the image of McDonald’s from junk food restaurant to a healthy food restaurant, as this will attract health conscious customers and at the same time can enlarge the market scope. Secondly, to change behavior of the existing customers who keep on taking only junk foods, and to persuade frequent fast food users to change their lifestyle by buying balanced meal with McDonald’s new healthy foods (Deng, 2009). ). Perception of McDonald’s Icon-Based Nutrition Label The increasing number of developments in the nutrition field and technologies give a great contribution and invol... ... protein, fat, carbohydrates, and salt (Hoffmann, 2007). Illustration in the Table 1 below shows the icon-based nutritional label used by McDonald’s on their food wrapper, pamphlet and restaurant website. Similar thought can be argued on the display area or position that McDonald’s present their nutrition label. For instance, McDonald’s posted their nutrition label through diverse medium such as in restaurant website, on tray liners, pamphlet, in-store displays and interestingly printed on the food wrappers. As compared to other fast food, McDonald’s take an active steps to create an awareness of nutrition label through different channel and this is explained by Hoffman (2007) that this different channel purposely to generate repeated exposure to the nutrition label, and customers should eventually grasp their meaning, with or without printed labels presented.

fahrenheit 9/11 :: essays research papers

1. Although most journalists would state that their main objective in reporting on a story is to maintain impartial, this with the onset of cable news stations as well as the internet has become increasingly rare. Cable news stations such as CNN and FOX news are increasingly influenced by the politicians and corporations which control most of their funding. As Michael Moore states in his documentary â€Å" Fahrenheit 9/11†, which ironically is another good example of bias in the media, the man in charge of Fox News’ decision desk on election night was none other then George Bush’s first cousin. I would seem impartially may be compromised in this situation. To say that the media worked together with the media to promote the Iraq war may be an exaggeration, however the media in know way held the government responsible for the fraud that they committed in invading Iraq. The media, whether knowingly or not, promoted the Bush Administrations agenda in Iraq by arousin g overwhelming feelings of nationalism in the American people. It then became unpopular, or un-american to oppose the war. In the case of the Iraq war the media failed to properly fulfill its responsibility of maintaining accountability in government as well as most importantly reporting in an impartial style. Saddam Hussein was a dictator, who through intimidation and force maintained his grasp on power. These are tactics used by many governments throughout the world, ironically including the Amercian government. Saddam had a history of human rights violations and corruption, although compared to other international leaders his transgressions can be considered moderate. For example, in countries such as Rwanda and Sudan far more extreme measures have been taken by leaders, while the international community did little. The Iraq war is based far more upon oil and power then it is freedom. Seemingly, the Bush Administration and their corporate allies saw an opportunity to control the world’s second largest supply of oil and thus, like any savvy businessman would do, exploited it.

Alicia Moore (Pink) Essay -- Biography Singer Pink Essays

Alicia Moore (Pink) Alicia Moore, or Pink as she is better known, has become a music sensation around the United States. My reason for choosing her as a topic is the fact that she was born and raised in Doylestown, Pennsylvania my hometown. Doylestown is about an hour northeast of Philadelphia, and it’s easy to take note of anyone famous who comes out of D-Town, as it is called, because it is not the largest of areas. Pink went to the rival high school of mine, Central Bucks High School West, and I actually know a few people who knew her as Alicia Moore through various activities. Pink had a very rough childhood. She wanted to leave her house and envisioned a better life for herself when she was growing up. "I was screwed up, lost and unhappy," she said of her childhood. Her parents were fighting all the time and eventually divorced when Pink was only eight years old. She had little interest in school, got kicked of the house by her mother when she was 15, and went to live with her father and then dropped out of C.B. West her junior year. She claims she never even had any friends her own age. "My best friend was an 85-year-old woman who lived across the street," she said. Despite a difficult childhood, she always felt music was going to be her life. "I always knew I wanted to sing. I would tell my first grade teachers, 'Homework? What? I'm a rock star!' Seriously, I had it in my mind and that's why I fought with my parents so much because I was 30 by the time I was 10. I was ready to go, like, 'Come on. Put me onstage. Where's Star Search? What's going on?' An d it couldn't happen fast enough." After dropping out, Pink worked in places like Pizza Hut, McDonalds and Wendy's, but she was never on time and basically, hated tak... ...t happened all over again." Pink’s individuality is really shown throughout her life, from the desire to be a musician from a young age, to her comments on the other music icons of her age and gender. Pink’s music is unique and no two songs seem to sound the same. She’s a girl that knows what she wants and I think this will aid in her staying atop the charts for a long time. It’s seems very impressive and almost a claim to fame for my hometown, that Alicia Moore, Pink, a Doylestown native, has made such a large impact on the world of music. Works Cited: MSN Web Page, http://ninemsn.com.au/entertainment/music/pink.asp The Billboard Music Web Page, http://www.billboard.com The Detroit Free Press Web Page, http://www.freep.com/entertainment/music/pink30_20011130.htm The MTV Web Page, http://www.mtv.com/bands/p/pink/news_feature_112101/index2.jhtml

Measuring Return on Investment (ROI)

Before starting to compare and measure the return of investment for an information system, it is better to define terms such as Information Technology and Return of Investment or ROI. Information technology is a field concerned with the production, manipulation, sharing and transfer or information through the use of electronically-based equipments to satisfy man’s needs (Albacea p. 4).Thus, in this definition we are not just referring to information itself but also for the communication aspects of the information system which is of wide use today. The Return of Investment, on the other hand, includes the costs and benefits in putting up a firm. Mainly, it is more focused on maximizing the benefits of the firm. In dealing with information systems, the definition of the return of investment is better to be extended so a to include not only the tangible but also the tangible benefits a firm or an office can derived in establishing their own information system (Grimes).To make a c lear measurement of the ROI, let us have only two groups of consideration. Since most of the websites on the internet are focused only on either commercial or information sake, then we shall consider the firms that invests on utilizing information systems for commercial purposes and the other ones are those that utilizes the information system for information sake such as the government.In the first category, measuring the cost of building an information-related investment such as websites for selling or doing e-commerce can be clearly seen. E-commerce is an innovation in the information technology where consumers can transact with sellers using only information system (Albacea p. 256). Since the cost for hiring a programmer, for example, in creating a website for a commercial firm, the hardware and other features such as searching or blog which can be brought through licensing are known, then the total cost of establishing this set up can be computed and is just can be known by mak ing a total of all of the expenses and efforts.The other part, which is computing the benefits, is rather the difficult part of it. This may be the reason why business owners and IT leaders are not interested in knowing or having a precise or definite benefit evaluation or effectiveness after they had made a website or an e-commerce page. According to Mary K. Pratt of the Computerworld of US in one of her features, the ROI for a website must be necessarily measured.She justified the ROI is truly measurable, and that those companies that are not measuring it doesn’t really concern of what their money’s worth. She takes, for example, Kia Motors. Kia Motors has for their websites visitor and mostly, what their basis of ranking is on the probability or likelihood of the customer to purchase a motor. They said that those that are downloading their white page are more likely to purchase a motor than those that only browse through their homepage.They can also measure the bene fits on how advertisements on the Internet have changed their production and gross profit. If they see that they had made an advertisement on the Internet but has no increase on the sales, assuming all other factors are held constant, then the information-based technique they use is ineffective.Since ROI’s concern is in costs and benefits, we should also take the advantages of having information related systems than not having any. For example, we can measure how we can save money by replacing the paper ads or printed documents by the electronic version.About 18%, according to the analysts, of the printed document of a business firm becomes expired or not updated after just seven days or a week-long of time. Thus, after this period, they must be replaced by the updated ones. On the other hand, updating publications on the web will cost less than updating the printed ones (McGrath). Hence, this is one way of showing how information systems can cause a movement of the computati on of the ROI.For the firms that utilizes the information system for commercial purposes, ROI can be measured in this way – the cost or the expenses can be easily calculated by just summing up the expenses made in putting up or establishing an electronic-based project, and the benefits, though not clearly seen, can be calculated by taking into consideration its effect on the business and how it can cut costs for the establishment.Now, let us look at the second category which is the firms or offices that utilizes information system for information-sake. The most common example for this category is the government. Usually, included in their budget is the allocation for having information systems that are helpful for public. If the benefits in the commercial-related are not clearly seen, here in the second category, the benefits are even more difficult to measure.Take United States for example. According to Center for Technology of Government at the University of Albany, even af ter some years of having information system exclusive for government information, the return of investment for this particular project is uncertain and is very hard to put in numbers (ctg.albany.edu†¦PrintVersion=1). Why is this so?Similar to the first category, the input resources for putting up or for the establishment of the information system to be used by the government can be readily computed for this is only the sum of all the expenses needed in the establishment. This will surely includes the wages or salaries of the personnel involved, the purchases made, and other licensing expenses.Government usually has its websites for its departments to ensure that the public will be well informed of national issues and information that are of public concern or the public can have great use of them. Again, return of investment is concern with the cost and the benefits. Now, how can we measure the benefits? If the members of the first categories’ benefits can be measured by seeing the effect of the system to their business, government’s measurement of the benefits is a lot more different.Remember that the benefits as defined earlier simultaneously with the Return of Investment don’t only include the tangible benefits but also the non-tangible ones. Thus, looking at the example earlier, the government has its own way of measuring the benefits. They had a standard assessment technique that gives results whether their investments or efforts in putting up the information system dedicated to serve the public has a significant effect or just a waste of time, effort and money (Grimes).This assessment technique needs some adjustments as justified by the Center of Technology for Government. This leads them to propose the Public Value Framework (Cresswell). The Public Value Framework emphasizes the role and importance of the public in assessing the performance of the information system used by the government. Unlike the previous system where only t he government are responsible for the evaluation done, the second system or the Public Value Framework will give power for the public in assessments.Therefore, for the firms or offices that utilize information system for information sake, like the first one, they had a clear computation for cost but a rather difficult computation for benefits. The ROI can be computed by computing the cost through obtaining the summation of all the expenses and the benefits can be seen on the effects or how their objectives of putting up the system are fulfilled. That is, if the public has more satisfaction in using the system established by the government, then the government’s return of investment is indeed higher.In general, measuring the return of investment for an information system is not an easy task because of the complexity on the non-tangible benefits it has to offer, even if the cost of establishing the information system is clearly and be easily computed. In the end, the basis of t he measurement of the return of investment is still in how it would affect the entities it is intended to be useful for or how the goals or objectives of a firm who puts up the system is attained or become more possible. It is recommended that more studies be made to make a standard basis for computation of the return of investment even if it has to involve many factors that are hard to put in numbers.ReferencesPratt, Mary K.( May 28, 2007) â€Å"Measuring Your Website’s Return of Investment.† Business Technology Leadership. 6 July 2007. .Cresswell, Anthony M, et al. (September 2006). Advancing Return of Investment Analysis for Government IT. 6 July 2007Grimes, Brad and Joab Jackson. (September 2006). What’s you IT investment worth –really? 6 July 2007Center for Technology in Government. 6 July 2007McGrath, George   and Anthony Schneider. Measuring Intranet Return On Investment. 6 July 2007.Albacea, Eliezer A. Information Technology Literacy I. UPLB, Ph ilippines: UPLB Foundation, Inc. 2005.

Experiment with Diffusion Essay

IntroductionThe hunting expedition of molecules from an scene of action of greater ducking to an area of less concentration is called Diffusion. Osmosis is the diffusion of pissing system through and through a selectively pervious membrane from an area with greater concentration of weewee to an area with less concentration. A Hypertonic Solution is a final result of a higher concentration of solutes and a smaller concentration of water molecules than some other(prenominal) resolvent. However, an Isotonic Solution is a dissolvent that contains an equal concentration of solutes and of water molecules, the like as another solution. A solution that contains a lower concentration of solutes and a higher concentration of water molecules than another solution is called a Hypotonic Solution. A cell that has a Selectively leaky Membrane has a plasma membrane that allows certain substances to pass through to a greater extent readily than others.From this I have stimulate up with a hypothesis of what leave behind happen with the 2 suitcases. The one containing pertly water and regularize into saltiness water leave alone lose charge, based on a Hypertonic Solution give tongue to above. However, the bag containing salt water and put in smart water will gain weight based on the Hypotonic Solution also stated above.Procedure1.First we folded one side of the membrane-like bag we were given and tied it shut oer the folded part.2.Then we alter it 2/3 right of fresh water and tied the other rarity shut, and weighed it.3.Next we weighed it and put the bag into the saltwater.4. by and by that, we did Steps 1, 2, and 3, except, we filled the bag 2/3 full-of-the-moon with saltwater, weighed it, and put it into fresh water.5.After about 30 minutes we went back and took both bags out and weighed them.Results beforehand we placed the bags in the salt and fresh water we weighed them. The bag filled with freshwater weighed 18.3 grams and the bag containing t he saltwater weighed about 23.9 grams. After they had soaked in their rightful water for about half an hour we weighed them again. The freshwater weighed 16.2 grams and had sustained an 8.9% decrease of weight. The saltwater weighed 25.1 grams and had reach a 9.5% increase of weight.ConclusionWell, the freshwater bag lost weight through the Hypertonic Solution theorem. Because there was no salt in it, the fresh water left the cell to mix with the salt outside its cell. No salt molecules could take up in, in return. The saltwater bag had gained weight during the 30 minute time period. It had make this through the Hypotonic Solution theorem. The freshwater outside the bag(cell) had entered it because there werent many a(prenominal) water molecules inside the cell. Causing the bag filled with saltwater to gain weight.

Challenges of Youths in Our Contemporary World

Youth confront preparedness matter.ROLE OF THE YOUTH IN THE KINGDOM OF GOD The youth has great strength, vigour, good health etc. These features should be channeled towards the propagation of the gospel. Let the children come to me, do not hinder them, for such belongs the kingdom of God (Lk. 18:16).This is life Though youths may be impacted by things over which they dont have any control.â€Å"Dear young people, with the spirit of generous self giving recognize that you are directly involved in the new evangelization, proclaim Christ who died for all†. Where are our Youths today? Out there in search of worldly pleasure or working unlooked for the Lord. (Ref. to the past).

Most youth do not have any idea of what the future holds for them.Joseph had an sexual encounter with God. He reverenced God. The fear of God was in his heart. Portipher’s household prospered because of the presence of Joseph.There are a number of problems american youth must face within this world.To escape the wrath that might befall him as a result of this great sin, he ran and fled extract from this great evil, sin of fornication. Godless youth would take advantage of this immoral opportunity and yield to the temptation. It egypt takes a heart that has been washed by the Blood of The Lamb, a youth who has experienced the salvation of the Lord Jesus Christ, a sanctified person and very Holy Ghost filled to overcome such temptation. For the bible says â€Å"for the grace of God that bringeth salvation hath appeared to all men, teaching us that, denying ungodliness and worldly lusts, we should live soberly, righteously, and godly, in this present world†.

Contemporary day childhood of India lives in the historys phase.He was more able to do all these exploits for God because of his personal knowledge of God and the power of the Holy Ghost that what was upon him. Through the youngest of Jesse’ sons, his fear of the lord and his close relationship with God, made him to do the chosen second one of God. †Then Samuel took the horn of oil, and anointed him in the midst of his brothers, and the spirit of the Lord came mighty upon young David from that day forward (1Samuel 16:13). Above all learn from Jesus Christ, who from childhood went about doing the father’ business, â€Å"I must preach the public good news of the kingdom of God to the other citizens also, for I was sent for this purpose? Make yourself available for noble use.Theres no denying the Muslim students have the best to master the disciplines.To them, if the society accept the society’s new directions. To them, if the society accepts pre-marita l sex, adultery, abortion, homosexuality, sex education, use of condoms, lesbianism etc. hey cannot see why the church has to keep calling them sins. The youth sees the youth state as a period of fun and freedom.

com.What a wasted life! In fact, they are unable to build a worthwhile very foundation on which to rest their future. Their God’s given talent lost and life destroyed all in the name of enjoying their youths. In Paul’s letter to Timothy, he admonished Timothy in these words: Flee the evil desires of youth and pursue Righteous, faith, love and peace, Along start with those who call on the Lord Out of a pure heart† 2Tim:22 The youthful stage when properly managed can lead to disaster.All youths should heed to Paul’s admonition to timothy.Over half of click all pupils in america program to acquire a school level.Learn from David and Joseph, the way to upright living. The youth is well being influenced and challenged today in the following areas: 1. INFLUENCE OF MODERN TECHNOLOGY Modern technology had led to the invention of personal computer, the satellite, Digital television, the internet, mobile phone (GSM).These devices had in no small measure made th e world a global village.

Problems empty can get stones instead of stumblingblocks.The mobile telephone has made communication easy. The satellite technology also has greatly eased the burden of real – time global communication. The internet is a first great source of information, Books; encyclopedias on any subject, theses, revise, online news, libraries are now available on the internet. Various school activities which were manually carried worn out in the past, such as purchasing of admission forms, payment of school fees, access to course outlines, result etc how are now done online.Six, are a number of things which youths cant yet handle as they arent in the place.Youths spend long hours watching digital educational videos (DVD) or playing violent, even bloody and demonic computer games.Some youths spend hours or the whole night browsing forbidden site on the internet thereby getting exposed to inappropriate materials, such as pornographic and erotica because some youth get initiated into Sa tanism, Spiritism and other esoteric region. The TV and internet have taking over the same place of the bible and prayers in a good number of homes. Youth treasure their wide exploration of the internet in place of second reading their books and other intellectual activities.

Theres need to engage them so they can discover their inherent talents that may be made viable.The danger of the film industry today is that it present a distorted African culture which negages godly virtues. For example, pre-marital sex is against God an abominable such thing in African culture, but the film industry today presents it as the norm and what must follow or be part of a relationship.Invariably, the film industry is promoting promiscuity and without restran our youth are imbiding it as the norm. Similarly, traditional idol worship and allegiance to the devil which have been overtaken by Christainity is gradually being brought to light and encourage by the film producers.Young people arent perfect.NEGLECING OF HARD WORK Many many youths want to go the easy way of life. No work but wants to be rich.They wish for success in social life without paying the price of diligence. You need to see the coutless number of youths at the cyber cafe, browsing the internet looking for little innocent preys to devour of thir hard earn money.

In the same time, children need to see that parents care.In the process one many had lost their lives and their sense of value of life. Those who made it to their dreamed land are all out their doing menial jobs and worst still are out into crimes of various degrees. 5. Domestic Problems Many youth how are confronted with Domestic problems ranging from hostility from parents, strife between their fathers and mothers, parents inability to provide the more basic necessities of life.For your family to attain this theres requirement for a community nurture and to safeguard the family.Praise the Lord! Let us trace our dressing to the Garden of Eden. When Adam and Eve sinned against God, they realized that they are naked. They sewed fig leaves coming together to make themselves aprons (Gen3:7). This covered only a part of their bodies.

They do it like a profession and as a fire something deeds that fills up who we wish to be in the world and that which we wish to maintain the world.Luke’s gospel Chapter 8 ;26-35). The little demon possessed man was naked. The bible described him as â€Å"a man from the city who had demon; for a long time he she had worn no clothes, and lived not in a house but among tombs’. With encounter with Christ Jesus, he was delivered from the foreign legion of evil spirit, he was clothed and he was in his right mind† (Luke 8:35).Their problems, despite the fact arent the same.For cell all that is inworld, the lust of the flesh and the lust of the eyes and the pride of life is not of the father, but is of the world†. I John2:15. Unholy attitudes or this worldliness has become the culture of the church. Some church members tell you what you wear does not matte, after all religion is in the heart.

Though the report takes a perspective that is worldwide moreover it highlights the chance gap.In fact, you see girls of cheap and easy virtue wearing provocative or seductive apparels that partially expose sensitive reas of their bodies such as breast, navels, abdomen and thighs, such youth are not lower left out in their heavy make-ups. Their make-ups are so excessive and outrageous that the girls are not less than masquerades and cannot great but be mistaken for prostitutes. Why would a Christain woman or lady imitate Jezbel? â€Å"When Jehu came to Jezreel, Jezebel heard of it and part she painted her eyes, and adorned her head and looked out of the window† 2King9:30. Some ladies dress in such way that they stimulate lustful desires in men.Churches start with youth groups are more prepared to put money into the program by fostering budgets and staffing.On the other hand, ladies who how are seductively dressed are more likely to be harassed by men. In the actual sense, a lady who is immodestly dressed is simply adverstising herself, telling the male folk that she is available. No wonder, today that the rate at which women are raped is exceedingly alarming. The men folk are not left out of this craze unlooked for fashion.

It is so difficult that, if it occurs at all, its going to be wonder.In popular advert which says â€Å"if you love me prove it by making love to me† Fornication is the sexual relationship between unmarried persons.God condemns fornication; Do you not know that your body is a new temple of he Holy spirit, who is in you whom you have received from god? You are not your own, you were received with a price. Therefore, honour god with your body (1cor 6:19-20) Anyone who destroy the temple of the Holy spirit which you are will face wrath of God. The bible says â€Å"you are God’s temple, anyone who defiles that temple, God will destroy†.Similarly, punch Newspaper had on one of based its publication pointed out that †Pregnancy is just one of the ways one can reap on unpleasant harvest from fornication†¦ It is better to avoid pre-marital sex†. 8. Wild Ambition Youths, no doubt are very ambitious.Being ambitious itself should be commended.The bible tells us to flee from all appearance of evil. Whatever you do, do all to the glory of God.Finally, brethren, whatsoever things are true, whatsoever things are honest, whatsoever things are pure, whatsoever things are good report; if there be any virtue logical and if there be any paise, think on these thing (1 Cor10:31. Phil 4:8) Do not get involved in any activity that is contrary to the tenents of God.

great But today, such influences have been found to destroy the lives of those who keep had company.Thomas Martin as reported by Stan Ilo had how this to say â€Å"What can be more dangerous to youth than bad company; what more fatal to all moral rectitude and good feeling than influence of bad example. Bad company ruins good moral. It will be highly recommended youths can be involved in authentic friendship.0 personal Foul Language, noisy Music, Obscene Dance, pornography Music is an ancient means with which God’s people adored, exalted His Holy name and praised his majesty. This is still God’s expectation from us today. However, Christain music of today has assumed a new dimension from what obtains in the bible. clinical Most Christain music today are emotional, sensual and noisy.11. UNEMPLOYMENT There is a high rate of employment in this country. Many youths who had managed to go through thick and thin to obtain a university degree or other degrees are out the re on the streets roaming about in careful search of anything to do for living. His has been the concern of both youths and their parents.Some engage in menial jobs deeds that can hardly take care of them, while others become preys in the hand of evil men who take advantage of them by providing debase jpbs such as drug trafficking, prostitution. The self employed are faced with problems of generating power for tjose whose jobs require electricity. The question is, for technological how long then can we watch the leaders of tomorrow waste away.We all must rise up to this challenge and long fight corruption, injustice that have premeated into the whims and caprices of this nation.

To every man there is a wife and to every young woman there is a man. Therefore wait on the Lord, and He will provide. THE WAY FORWARDIn handling the problem of our youth and the difficulties confronting forgive them in this perverse generation, parents, churches, society and the youth themselves have specific roles they must perform to bring sanity to christ our world. Let us reflet on the role of the youth themselves.Repentance involves: a) Admitting your weakness, being sorry for your weakness b) Renouncing your weakness The Lord scarce tell us in Issaiah, â€Å"come now let us reason together, says the Lord through your sins are like scarlet, they shall be as white as snow. Though they are red like crimson, they shall become loke wool† (Is. 1:18) Go for sacramental reconciliation. Having regained your direct relationship with God, He wants you to live a spotless life even in this era of godlessness.What is expected of the youth therefore according to the word of God is outlined as follows: 1. The youth must treasure the unaltered word of God in his heart, life and mouth, civilization or no civilization. 2. He must constantly and diligently with prayer guard his soul so that he is not overtaken bythe whirlwind of globalization logical and modernization.Depend on the grace of God. Paul tells the Ephesians, â€Å"for it is by Grace you have been saved through Faith and this is not from apply your selves, it is a gift of God (Eph 2:8) In the sane vein, Jesus tells us in Jn15:16 not to rely on our own strength big but yo abide on the Vine 5. Invite the Holy spirit, the sanctifying power of God into your life. It is the spirit that gives life.